Extension for use with gage heads. Extensions may be combined for longer gaging depths. Special length extensions available upon request.

Flex-Bore™ 0° or 90° View Camera Head - 9mm dia. head. Reach Inaccessible Areas Quickly and Easily! • 9mm diameter water-proof camera with 1m (3f...

Triga-Bore Heads have a large measuring range and are supplied with fixed anvils eliminating operating error. 24 heads cover .236"-7.87" (6-200mm r...

Supports Triga-Bore handle/head when not in use.

Description Sets Available covering a measuring range: .236"/6mm to 3.937"/100mm. Sold with or without indicators. Ideal for solving internal dia...

Description Economical Basic Set includes: Pistol Grip Handle 3-Point Bore Gage Head Triga-Bore™ Stand (No. 20336) Fitted hard plastic case (with...

Accepts head in ranges of: .236-.630" (6-16mm)  and .630-7.874" (16-200mm).

Description Economical Basic Set includes: Flexbar Model No. 15835 Bluetooth Electronic Indicator, 0-.5"/12.5mm range Pistol Grip Handle 3-Point B...

Accepts head in ranges of: .236-.630" (6-16mm)  and .630-7.874" (16-200mm).

Spherical shaped heads are useful in deep bores where holding the bore gage straight in the bore is difficult, the spherical shapes allows only a s...

Precise groove measurements are made easily and accurately. Application requirements for groove width minimum is .060" (1.5mm). Groove depth may no...

To design the Anvil head for Slot measurement, the following information is required:  Length of slot to be measured Slot Width Depth of clearance...

Available in two or three point thread measurement heads according to application.

Available in two or three point thread measurement heads according to application.

To design the Anvil head for Spline measurement, the following information is required: profile drawing of the Spline to be measured with full desi...

To design the Anvil head for Slot measurement, the following information is required:  Entry Diameter Length of Component Datum point diameter Min...