$195.00
Super Wee Block Set
Smallest V Blocks in the World. Provides maximum bearing surface. Features Precision hardened and ground, Wee blocks are within .0002" in both squ...
View full details
$195.00
Products
from $10.50
Surface Finish Comparator
Details For Engineers, Inspectors, Purchasing Agents HANDY, INEXPENSIVE, USE AS A GIVE-AWAY For Classes on Drafting, etc. ACCURATE - Exact Reproduc...
View full details
from $10.50
from $51.00
Surface Roughness Scales
250 to 2000 Microinches (Available in Metric) Solid electroformed Nickel Reproductions of actual machine surfaces. Overall Dimensions: 1⅜" x 6". 1...
View full details
from $51.00
Sale
from $155.00
Surface Roughness Standards Set – 30 Specimens
Ideal for use in drafting room, engineering department or in the small shop. Specifications This set has 30 specimens, each are 7/8" x 3/8" compris...
View full details
from $155.00
Save 23%
$32.40
$25.00
Table Edge Clamp for High Intensity Cool LED Machine Lighting
Table Edge Clamp for Standard Output Models.
$32.40
$25.00
Save 23%
Request Quote
Taper Measurement
To design the Anvil head for Slot measurement, the following information is required: Entry Diameter Length of Component Datum point diameter Min...
View full details
Request Quote
from $6.00
Tapered Indicator Contacts
4 Sizes Available Hardened Steel with Black Oxide Plating.A.G.D. 4-48 threads. Model No. 18615 - ¹³/₃₂" Model No. 18616- 1" Model No. 18617 - 1½" M...
View full details
from $6.00
$22.50
Tapered/Flat Tips
Pair of Tapered/Flat Tips Replacement Components Model No. 19233, Pair of Tapered/Flat Tips for Flexbar Digital Multi-Gage.
$22.50
from $49.00
Test Indicator Holders
Assorted Test Indicator Holders - Holders for fastening at the dovetail or the stem permits use on any test indicator. Axial Support Bracket Holder...
View full details
from $49.00
from $98.00
The Flexbar® Viseguard™
Quick and easy vise mount Lexan® shield helps to protect machine operators from hot chips and coolant spray at the spindle of your machine. Advanta...
View full details
from $98.00
$28.50
Thin Pour Cartridge (50ml)
Reprorubber® Thin Pour (Green) 50ml Cartridge Clone Any Part Quickly With Reprorubber® Reprorubber® is an exotic metrology-grade rubber that self-c...
View full details
$28.50
$165.00
Thin Pour Cartridges (50ml) - 6 PACK
Reprorubber® Thin Pour (Green) 50ml Cartridge Clone Any Part Quickly With Reprorubber Reprorubber® is an exotic metrology-grade rubber that self-cu...
View full details
$165.00
$1,945.00
Thin Pour Kit - Case of 10, 380ML
IMPORTANT STOCK ALERT: Item is currently on back order. Please allow 2 weeks to be re-stocked. Available in sizes 130ml, 380ml Kit & Case of...
View full details
$1,945.00
$79.50
Thin Pour Kit, 130ML
Available in sizes 130ml, 380ml Kit & Case of 10. Clone Any Part Quickly With Reprorubber® Reprorubber® is an exotic metrology-grade rubber t...
View full details
$79.50
$199.00
Thin Pour Kit, 380ML
Available in sizes 130ml, 380ml Kit & Case of 10. Clone Any Part Quickly With Reprorubber® Reprorubber® is an exotic metrology-grade rubber t...
View full details
$199.00
from $84.00
Thread Base "In-Line" Fine Adjustor
A new top-end, in-line fine adjustor which holds all AGD dial indicators as well as test indicators with dove tail fittings. Flexbar models are now...
View full details
from $84.00
Request Quote
Thread Measurement
Available in two or three point thread measurement heads according to application.
Request Quote
from $67.00
Thread Plug Gages with Handle Class 2B (GO-NOGO)
Description Gages are made in "X" tolerance. Classes 2A and 2B most commonly used for general applications including bolts, nuts, screws, and simi...
View full details
from $67.00
from $97.50
Thread Ring Gage Set Class 2A (GO-NOGO)
Description Gages are made in "X" tolerance. Classes 2A and 2B most commonly used for general applications including bolts, nuts, screws, and simi...
View full details
from $97.50
$49.00
Thread Wire Measuring Set (Made in the U.S.A.)
Thread measuring wires accuracy is .00008" Includes 48 wires in 16 different sizes Measures all U.S. 60° threads Laminated conversion chart for 60...
View full details
$49.00
from $54.50
Tom Thumb Arm ONLY
Ideal for very tight work areas. Precision engineered. Universal flexible arm locks into an extremely rigid position by turning knob. Supports up t...
View full details
from $54.50
$97.50
Tom Thumb with Mag Base
Tom Thumb Arm Mounted on Pot Mag. Base: 1⅛" dia. x 1⅜" high 25lbs. pull 5" post with fine adjustor. Ideal for very tight work areas. Precision...
View full details
$97.50
Request Quote
Top Cover Guard
This product is Quote Only. Complete form in tab below or Call +1(800) 879-7575 to order. Top cover guard for drill press belt/pulley guard.
Request Quote
from $2,295.00
Totalguard™
Description SLIDE AND SWING ASIDE MILLING MACHINE GUARDS FULLY ADJUSTABLE FOR VERTICAL, HORIZONTAL AND C.N.C. MILLS Available in three sizes to fit...
View full details
from $2,295.00
Request Quote
Totalguard™ Vise Panel
This Clear Panel Covers The Gap Left When The Two Front Panels Cannot Be Closed Completely Due To A Protruding Vise As Shown. The Guard Simply Hoo...
View full details
Request Quote
$27.00
Transfer Punch Set
Description Transfer Punch Set is used to tightly fit the tolerances of an existing hole and, when hit, precisely transfers the center of that hole...
View full details
$27.00
from $385.00
Travelguard™
Cross Slide Type Description Point of operation guard for lathes to keep the operator shielded from chips and debris. Extra heavy duty for lathes, ...
View full details
from $385.00
from $360.00
Triga-Bore™ 3-Point Gage Heads
Triga-Bore Heads have a large measuring range and are supplied with fixed anvils eliminating operating error. 24 heads cover .236"-7.87" (6-200mm r...
View full details
from $360.00
from $179.00
Triga-Bore™ Gage Head Extensions
Extension for use with gage heads. Extensions may be combined for longer gaging depths. Special length extensions available upon request.
from $179.00
$360.00
Triga-Bore™ Lever Style Gage Handle
Accepts head in ranges of: .236-.630" (6-16mm) and .630-7.874" (16-200mm).
$360.00
$360.00
Triga-Bore™ Pistol Grip Gage Handle
Accepts head in ranges of: .236-.630" (6-16mm) and .630-7.874" (16-200mm).
$360.00
from $795.00
Triga-Bore™ Starter System Set
Description Economical Basic Set includes: Pistol Grip Handle 3-Point Bore Gage Head Triga-Bore™ Stand (No. 20336) Fitted hard plastic case (with...
View full details
from $795.00
from $945.00
Triga-Bore™ Starter System Set with Bluetooth Indicator
Description Economical Basic Set includes: Flexbar Model No. 15835 Bluetooth Electronic Indicator, 0-.5"/12.5mm range Pistol Grip Handle 3-Point B...
View full details
from $945.00
from $1,525.00
Triga-Bore™ System Sets
Description Sets Available covering a measuring range: .236"/6mm to 3.937"/100mm. Sold with or without indicators. Ideal for solving internal dia...
View full details
from $1,525.00
$135.00
U.N.C. Size Hole Location Plugs (Inch)
Description Hole Location Plugs All diameters concentric within .0001 T.I.R. Shaft dia. (C) .2500 + .0002, - .0000 on all gages to simplify calcula...
View full details
$135.00
$135.00
U.N.F. Size Hole Location Plugs (Inch)
Description HOLE LOCATION PLUGS All diameters concentric within .0001 T.I.R. Shaft dia. (C) .2500 + .0002, - .0000 on all gages to simplify calcula...
View full details
$135.00
$395.00
UL Accessory for Digi-Circe
Interchangeable Measuring Accessories for Digi-Circe By inserting this accessory in the special slots on the "Circe" gauge, it is possible to meas...
View full details
$395.00
$425.00
Ultra Thin Parallels
Made in U.S.A. • ¹/₃₂" Thick - 20 Pair Set Features Hardened to 50 RC Parallelism .0001" Height .001" accuracy Includes fitted case Range Range O...
View full details
$425.00
$39.50
Ultrasonic Couplant Gel
Ultrasonic Couplant Gel for Ultrasonic Thickness Gage. Large 8 oz. bottle. Safety Data Sheet (SDS)
$39.50
$975.00
Ultrasonic Thickness Gage
Comes complete with 5MHz probe, bottle of ultrasonic couplant gel, operations manual. Compact durable fitted carrying case and includes NIST certif...
View full details
$975.00
$810.00
Universal 17" LCD Video Monitor
Class-A LCD Panels ensure exceptional Image Quality. 4:3 Aspect Ratio. 17" 1280 x 1024 Resolution VGA, SVHS & Composite Inputs 75mm Vesa Mount...
View full details
$810.00
$65.00
Universal Caliper Accessory Kit
Universal Caliper Accessory Kit (Does not include caliper) KIT CONTAINS: (2) Universal caliper bodies, (4) PAIR (8 Pcs) Accessory Points:(2) Flat,...
View full details
$65.00
$234.00
Universal Cam Lever Flexbar® on Vacuum Base
Ideally suited for benchtop, granite surface plates or precision flat surfaces. The heavy duty FLEXBAR® is completely flexible; lets you reach over...
View full details
$234.00
$119.00
Universal Cam Lever Flexbar® on Weighted Base
Ideally suited for benchtop, granite surface plates or precision flat surfaces. The heavy duty FLEXBAR® is completely flexible; lets you reach over...
View full details
$119.00
